For Exclusive Savings
Follow Us!
Click for the BBB Business Review of this Soldering Equipment in Bound Brook NJ

Official PayPal Seal
Secured by PayPal

  Home > Techspray Brand > SMT Cleaners >

  Techspray 1570-100DSP - Eco-Stencil UM Cleaner Wipes

Techspray 1570-100DSP Eco-Stencil Wipes


 
Manufacturer Price: $18.96
Price: $16.48
You Save: $2.48!
Minimum order must be purchased in multiples:   6

Availability: Usually Ships in 7-10 business days if not a special order.
Part #: TECHSPRAY-1570-100DSP
Quantity:

Product Description
 
The Techspray 1570-100DSP are Eco-Stencil UM Understencil & Manual Cleaner Wipes. These wipes come in a pop-up disposable container. There are 100 wipes in a container, 6 units/case.
 
Throughly cleaning SMT (surface mount technology) stencils, tools, and equipment is an important way to reduce misprints and increase throughput.  Techspray SMT stencil cleaners are designed for rigorous production requirements.
 
Effectively removes all types of solder paste (e.g. waterbased, RMA, noclean, leadfree) and uncured adhesive from screens, misprinted boards and equipment.  Completely safe on stencils, squeegees and equipment surfaces.  Ideal replacement for IPA cleaners, which are often prohibited because of safety and environmental restrictions on VOC emissions or waste disposal issues.
 
Instructions: Spray and saturate area to be cleaned.  Wipe gently at first to allow cleaning agent to break down paste or adhesive.  Continue to wipe in a circulat motion until remaining residues are fully removed.  Replace wipe as it becomes overly saturated with the paste/adhesive or tattered.  Dispose of soiled wipe appropriately depending on the type of paste/adhesive removed.
Underside Stencil Cleaning: Fill cleaner into designated reservoir of SMT printer.  Keep adequate liquid level.
 
Chemical & Physical Properties:
Appearance: Clear, mobile liquid
Odor: Faint ethereal odor
Flash Point: none
VOC (EPA): 2.7 percent, 26.5 g/l
VOC (CARB): 2.7 percent, 26.5 g/l
Boiling Point: 212 Degrees F (100 Degrees C)
Density: .99 at 25 Degrees C
 
Chemical Composition (Chemical Name / CAS NUMBER):
2-propanal-1-butoxy / 5131-66-8
Alcohols, C6-C12, ethoxylated propoxylated / 68937-66-6
Includes other hazardous components in non-reportable quantities.
 
Metals Compatibility (Material Name / Rating):
Brass Foil / Excellent
Copper Foil / Excellent
Nickel 200 / Excellent
Aluminum 6061 / Excellent
Aluminum 2024 / Excellent
Anodized aluminum / Good - some paint traces removed
Stainless Steel 316 / Excellent
Stainless Steel 304 / Excellent
Mild carbon Steel / Not recommended
Galvanized Steel / Excellent

 
Please note this item is sold by the case (there are 6 units per case) therefore minimum quantity is 6
For additional 1570 Items/packaging please see products below

Quickly clean paste of uncured adhesive
Non-flammable
Non-ozone depleting
Safe for stencils, tools, misprinted boards
Biodegradable
Low VOC, zero GWP

Additional Items of Interest
Techspray 1570-G Eco-Stencil Solder Paste Remover Techspray 1570-QT Eco-Stencil Cleaner
Price: $22.18

Add
Price: $11.80

Add
Techspray 1570-G Eco-Stencil Understencil Cleaner Gallon Teschspray 1570-QT Eco-Stencil Cleaner

All prices subject to change without notice. Prices advertised are for online orders only.
Shipping and/or international duties/taxes are separate. Stock availability can change at any time.

Be the first to write a review.



Techspray Brand > SMT Cleaners
Aerosols & Cleaners > Stencil Cleaners
Chemicals
Aerosols & Cleaners
Techspray Brand