For Exclusive Savings
Follow Us!


Official PayPal Seal
Secured by PayPal

  Home > Test & Measurement Equipment >

  Desco EMIT 50766 - Smartlog V5 ESD Tester w/o Software, 120 V

Emit 50766 Smartlog V5 Grounding Tester for North America, 120V


 



Desco Industries
Authorized ESD Specialist & Distributor
Manufacturer Price: $3,996.30
Price: $3,539.85
You Save: $456.45!

Availability: Factory stock. Will ship in one week.
Part #: EMIT-50766
Qty:

Product Description Technical Specifications
 
Desco EMIT 50766 - SmartLog V5

This item includes the following:

1 SmartLog V5™
1 Mounting Bracket
1 Dual Independent Foot Plate
1 Foot Plate Cable, 6'
1 Power Adapter, 12VDC 1.25A center pos.
1 Right Angle Ground Cord
1 DB9 Serial Adapter
2 Mounting Anchors
2 Mounting Screws
1 Thumb Screw
1 Certificate of Calibration


The patented* EMIT SmartLog V5™ system is designed for fast, frequent, and accurate testing of ESD personnel grounding items. Its unique design embeds an ESD tester, time clock, keypad, barcode scanner, Ethernet module and proximity badge reader (optional) into a compact stainless steel enclosure.

By touching the solid-state switch once, the SmartLog V5™ independently tests the resistance path limits of the worn wrist strap and both worn ESD footwear in less than 2 seconds. It may also test a worn ESD garment if it is used as part of personnel grounding path. Test results are electronically stored in the SmartLog V5™ and easily downloaded to a PC for logging records 
and evaluation. This product can be used as one of the tools to fulfill the ANSI/ESD S20.20 section 7.3 “Compliance Verification Plan.”

Paperless data can enhance operator accountability, immediately identifying problems while reducing logging and auditing costs. There is no need to dedicate a computer for each test station. The SmartLog V5™ is a complete system including all required components. Operator identification can be accomplished using the keypad, scanning a barcode badge or waving a proximity badge (verify compatibility with the factory).

The SmartLog V5™ can test either single or dual-wire wrist straps and its split footplate design provides individual footwear testing all in a single test. With the use of TEAM5 Software, the SmartLog V5™ can be programmed to assign unique test requirements to personnel. An individual can be required to test either wrist strap only, footwear only or a combination of the two.

If a resistance path is below or exceeds the set limits, the SmartLog will indicate failure via audio and visual alarms. Use the included relay terminal to promote access control for passed tests.

The SmartLog V5™ can also be networked to a company’s Intranet using its embedded Ethernet module. The SmartLog V5™ is calibrated to NIST traceable standards.

Independently tests the resistance path limits of a worn wrist strap and both worn ESD footwear within 2 seconds
Enforces test requirements specific to the operator
Multiple test options available:
- wrist strap only
- footwear only
- wrist strap and footwear
- wrist strap or footwear
- user choice
- footwear with wrist strap optional
May be used as a stand alone or networked tester
Improved stainless steel enclosure; barcode scanner accommodates larger/wider employee badges
Wrist Strap Test Limit; 750 kilohm low wrist strap test limit added for ANSI/ESD S20.20 conformance
Embedded Ethernet module for network communication
Embedded CCD barcode scanner
Foot plate detection circuit
Improved relay activation speed
Customer Checklist
Troubleshooting Guide
5-Year Limited Warraty
Made in the United States of America


All prices subject to change without notice. Prices advertised are for online orders only.
Shipping and/or international duties/taxes are separate. Stock availability can change at any time.

Be the first to write a review.



Test & Measurement Equipment
EMIT Testers
ESD Static Control
ESD Static Control > ESD Meters & Test Equipment
Test & Measurement Equipment > Testers > Electrical Testers
Test & Measurement Equipment > Testers