This Foot Grounder provides contact with the ESD floor both under the foot's sole as well as the heel area, providing a more continuous and reliable path-to-ground. These foot grounders are easier to install than most foot grounders and are designed for use on standard shoes. The snug, reliable fit can be easily adjusted to fit the individual wearer. These foot grounders are made from non-marring three layer high visibility yellow reversible static dissipative rubber with a black conductive inner layer.
Additionally, UL listed. It is a suitable ESD footwear component in Flooring - Footwear Systems meeting ANSI/ESD S20.20 when used as the primary grounding method. It meets <3.5 x 10E7 ohms per ANSI/ESD STM 97.1 Floor Materials and Footwear-Resistance Measurement in Combination with a Person, and significantly under <100 volts tested per ANSI/ESD STM 97.2 - floor materials and footwear voltage measurement combination.
Components:
A. 0.060" thick (plus/minus 0.005) non-marring, solid, three layer, rubber material. Three layers consist of a yellow dissipative outer layer with a black conductive inner layer, and a yellow dissipative outer layer. Will noy mar floors or shoes with black marks.
B. 3/8" wide, 18" long blue nylon ribbon contains 8 electrically conductive carbon suffused fibers, reversible, may be positioned on either side of foot
Home
.jpg)
