Desco 17252 is a foot ground, heel, non-marrying, 1 meg resistor.
Foot Grounders provide a continuous ground path between an operator and a properly grounded ESD protected floor. These foot grounders are designed for use on standard shoes. They can be easily adjusted to fit the individual wearer. These foot grounders are made from non-marring three layer yelow reversible static dissipative rubber with a textured grain black conductive inner layer. This unit includes a blue tab with carbon suffused dibers and a hook and loop fastening system for quick and easy fastening and removal. Full elastic strap provides maximum "flexing" comfort. Desco 17252 is UL listed. The product has been tested to ESD STM 97.2 - Floor Materials and Footwear Voltage Measurement in Combination with a Person. It is a suitable ESD footwear component in Flooring - Footwear System when used as the primary grounding method ( < 3.5 x to^7 ohms per ESD STM 97.1 Floor Materials and Footwear-Resistance Measurement in Combination with a Person).
Key:
A. 0.060 inch thick non-marrying, solid, three layer, rubber material. Three layers consist of a yellow dissipative outer layer with a textured grain, black conductive inner layer, and a yellow dissipative outer layer. Will not mark floors or shoes with black marks.
B. Nylon, blue ribbon, with 8 conductive threads, reversible, may be positioned on either side of foot.
C. 3/4 inch wide blue non-elastic hook material
D. 3/4 inch wide blue stretch loop material, for quick and easy attachment to foot
E. Patented* one megohm flat flex resistor
Home
.jpg)
