For Exclusive Savings
Follow Us!
Click for the BBB Business Review of this Soldering Equipment in Bound Brook NJ

Official PayPal Seal
Secured by PayPal

  Home > Test & Measurement Equipment >

  Desco EMIT 50579 - Monitor, zvm solo, europe

MSRP: $226.60
Price: $220.80
You Save: $5.80!

Availability: Factory stock. Will ship in one week.
Part #: EMIT-50579

Product Description Technical Specifications
Desco EMIT 50579 - Monitor, zvm solo, europe

This item includes the following:
1 ZVM Solo
1 Desco 09163 Dual-Wire Elastic Wrist Strap
1 Power Adapter, 12VDC
1 Mat Monitor Cord (Black)
1 Tool Monitor Cord (White)
1 Monitor Ground Cord (Green and Yellow)
1 Push and Clinch Snap
1 Washer
1 Flat Head Screw, 6-32 thread
1 Alligator Clip
1 Ring Terminal
2 Hook and Loop Fastener Strips
4 Cable Clips with Adhesive
1 Certificate of Calibration

Leading companies use continuous monitors as a cost effective component in satisfying the section 7.3 Compliance Verification Plan requirements of ANSI/ESD S20.20. The EMIT Zero Volt Monitor (ZVM) Solo is a single station continuous monitor for operator, supervisor, ESD worksurface, and metal tool fixture ground. It will continuously monitor the ground integrity and charge generation of one operator and supervisor as well as the ground integrity for one ESD worksurface and one optional metal tool fixture. It eliminates the need for periodic testing and record keeping of wrist straps. This single station monitor also features communication ports that allow it to be used with EMIT SIM Software for data tracking and 

The patented ZVM Solo is designed with Dual Polarity Technology for true continuous monitoring (versus pulsed or intermittent) of wrist strap functionality (path to ground and presence of 1 megohm Resistor) and operator safety according to accepted industry standards without capacitance variations from personnel or enviorment. Dual Polarity Technology uses dual wire wrist cords to place positive voltage on one line and negative voltage on the other, resulting in near zero voltage at the operator.

Single Station Continuous Dual-Wire Monitor
Continuously monitors the ground integrity and charge generation of one operator and supervisor as well as the ground integrity for one ESD worksurface and one optional tool, eliminating the need for periodic testing and record keeping of wrist straps
Patented* Dual Polarity Technology Provides Real-Time Continuous Monitoring for Operator Path-to-Ground and Presence of 1 Meg Resistor
True continuous monitoring (versus pulsed) instantaneously detects broken cords, intermittent faults, dry skin, loose bands, low resistance.  
Dual Polarity Technology
Steady-State DC Dual Polarity Signal yields virtually zero voltage on the operator
Operator Charge Detection Alarm
Alarms if the operator generates or comes in contact with a voltage that would be dangerous to an ESD susceptible item
RS-485 Communication Ports
Use with EMIT SIM Software for test data acquisition and management
User Adjustable Features
Use the internal DIP switches to enable / disable test circuits and modify the operator test voltage, operator charge detection voltage and worksurface resistance limit
Optional Stainless Steel Mounting Bracket Available Item 50578
NIST Calibrated with Certificate
Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on calibration of EMIT products
5-Year Limited Warranty
Made in the United States of America

Prices subject to change without notice. Stock can change at any time. Prices are for online orders only.

Test & Measurement Equipment
EMIT Monitors
Test & Measurement Equipment > Testers > Electrical Testers
Test & Measurement Equipment > Testers