Extruded Homogenous Vinyl
Provides reliable path to ground and eliminates static charge generation as a worksurface table mat, shelf liner, and cart liner.
Dissipative Worksurface - 10E6 - 10E8 Ohms RTT
Slows charge removal; meets ANSI/ESD S20.20 worksurface required limit and recommendation of ANSI/ESD S4.1
.100” Material Thickness
Additional energy absorption for components susceptible to physical shock
Laser Engraved With ESD Protective Symbol, Specs, and Manufacturer
Identifies ESD protective product for control & auditing purposes
Provides consistent electrical performance regardless of ambient humidity
Dimensionally Stable And Lays Flat
Minimal shrinkage and curling
Lead-free RoHS compliant
Superior Limited Lifetime Warranty
Electricals guaranteed for the life of the mat
Made In The United States of America
NOTE: Statfree® B mats do not work with continuous monitors.
Per ESD Association: "The most important functional consideration for worksurfaces is the RTG resistance from the top of the surface to the groundable point." ANSI/ESD S20.20 Table 1 recommends a requirement of less than 1 x 10E9 ohms. "If Charged Device Model damage is a concern then setting a lower resistance limit should be considered. Typically, 1 x 10E6 ohms." "Durability factors that should be considered are hardness, abrasion resistance, tear resistance, etc. Worksurfaces may require special heat resistant materials. Light reflection may be an important ergonomic consideration." (Ref: TR 20.20 section 5.3.1).
Due to variations in computer monitor displays, color shown may not be exact. For true accurate color, please email firstname.lastname@example.org to request an actual sample.